Automatic Multi-Disk Screw Press Sludge Dewatering Machine for Domestic Wastewater and Municipal Sewage Treatment

Product Description

Multi-Disk Screw Press Sludge Dewatering Machine

Structural principle

Mulit-plate sludge dewatering machine is consisted of fixed ring,movable ring and screw filter parts.This machine is combined with filtration enrichment technology and press technology,sludge concentrate and squeeze can be complated in a cylinder.In concentrate process,the relatived movement of fixed ring and movable ring can squeeze out water quickly,never blocked.In the squeeze process,with the decrease of volume of screw cavity,the pressure will become larger,then the water in sludge will be squeezed out.
Our machine use particular filter model replace the traditional filter cloth and centrifugal filtration method,make the solid-liquid separator and self-cleaning technology more easy and advanced.

Dewatering principle
 

1. Concentrate: When the screw axis move,sludge will be taken to forward and the pitch of the screw will become lessen,then the volume become lessen,so the pressure will become largen,so water will be squeezed out. Under the influence of gravity,water will flow out from the space of movable plate filter.

2. Dewatering: after concentrate,sludge will move forword with the push of screw axis,along the direction of mud cake moving,the pitch of screw aixs become smaller,the space of fixed and movable spacer become smaller too,The volume of screw cavity become lessen,then the pressure become largen at the influence of back plate ,so the water in the sludge be pushed out,the soild content of mud cake become largen.After this process,water will be separated out from sludge.
3. Self-cleaning: the relative movement between fixed ring and movable ring can avoid block effectively.So this machine can realize self-cleaning,this is a big advantage than traditional dewatering machine.

Working process
 

1. Confirm which kind flocculant will be used and confirm the adding ratio.

2. Before take on dewatering,please infuse flocculant,dilution of PAM is 500-1000 times.Sludge will be taken to mixed flocculation tank by sludge pump and PAM liquid will be sent to this tank by chemical feed pump too.Then mixer will mix them together,until from alumen floc.Then sludge will taken on dewatering process, and filter liquid will be squeezed out and flow back to raw water tank.
3. After concentrate,sludge will be pushed forward at the force of screw axis,at the influence of all kinds of force,sludge will take on dewatering in squeeze process,the filter liquid have high soild content,so this liquid will flow back to mixed flocculation tank to taken on dewatering again.
4. After dewatering,mud cake will be discharged from outlet,they will be send to converyor and taken to tippers,then they will be sent to dry field.


Model list

Model	Size (mm)	Power (kw)	Dry sludge
YM-101	2050*750*1350	0.92	6-10kg/h
YM-131	2300*830*1350	0.92	8-15kg/h
YM-201	2760*850*1600	1.12	9-25kg/h
YM-202	2900*1160*1600	2.05	18-40kg/h
YM-301	4050*1000*2090	2.2	40-80kg/h
YM-302	4200*1350*2090	3.3	80-160kg/h
YM-401	4800*1100*2290	2.2	90-200kg/h
YM-402	5000*2200*2290	3.3	150-400kg/h

Advantage
 

1. Wide renge of application

This machine can be used in municipal waste water,food industry, drinking inductry,slaughterhouse,fish breeding and poultry raising industry,dyeing and printing industry, petrochemical industry,paper industry,leather industry,pharmaceutical industry,etc.This machine can realize dewatering of high concentrate sludge,and they can dewater low concentrate sludge,the lowest concentrate is 2000mg/L.This machine use low speed mechanical squeeze method to realize dewatering.No filter cloth,no mud hole,don't need to rely on the defferent of gravity and centrifugal force,so they can dewatering all kinds of sludge (include oil-sludge )and no blocked.
2. No secondary pollution
The rotation speed is about 2-3 r/min,no shake,small noise,multi plate can self clean,only need little water to clean,no secondary pollution for water.No odor,odor will not spread to the environment.

3. Save running cost

This machine use mechanical squeeze to realize dewatering,no need rotary drum and other large body,so the whole design is compact and save the running cost.Use low speed screw squeeze technology,save power(unit power consumption is about 0.1kwh/kgDS).No block,only need little water to clean(unit water consumption is about 0.03t/h).24 hours running automatically, no need worker guard,labour cost will save a lot.

4. Automatic working
This machine can work automatically,from suck sludge,add medicien liquid to discharge mud take.No need operater,they can work 24hours.

5. Self-cleaning,no block

The relative movement between fixed ring and movable ring can avoid block effectively.

6. Long working life

Whole design is very compact and light,almost all the material is stainless steel,only need to change screw axis and movable ring.

Grouped equipment

1. Flocculation system : this system is used to mix chemical liquid ( PAM liquid )and sludge, sludge is flocculated after adding PAM,then take on dewatering.
2. Automatic chemcial dosing system : make chemcial liquid by powder automatically.   


Company information