Fully Automated Powder Dosing System for Maximum Efficiency

Product Description

                                                     Full automatic powder dosing system
technical principle
Automatic dosing system is an intelligent, automatic, continuous integration of dry powder dissolved and drug delivery device. This device consists of water supply system, dissolve powder dosing system, curing system, automatic control system.
 This device is powder medicament automatic continuous preparation and dosing system. dry powder chemical from hopper bottom of screw propeller into premixed premixed with clear water, by wet material into the dispensing slot to dilution mixing, concentration of production according to the requirements of customers;
Preparation solutions from the preparation tank into the storage tank again after the slaking tank, when the storage tank level high, preparation process automatically stop, when the solution down to low level, automatic startup process. Preparation tank and slaking tank are set blender, fully guarantee of dilution and maturation. Preparation flow and concentration can be adjusted by adjusting the feed water flow rate and screw shaft speed to determine.
 constitute
* water supply system*  dry powder dosing system * powder premix system *  dehumidifying drying system * integration three tank combination casing * mixing system * automatic control and detection system
feature
with high degree of automation, system controlled by PLC, operation on the interface and display units operating state, with intuitive man-machine interface, simple and convenient operation.
   system stable and reliable, when has fault related equipment will automatically stop as required
Adopting spiral feeder dosing powder, speed closed-loop control, ensure uniform feeding, scattered, precision within 1%
  Under prescribed conditions of production and continuous cast liquid, the mixture solution of ripening time guarantee in 2 hours. The mixture concentration was 0.05% - 0.05%;
 Tank body adopt SS304,PP material etc.
  Operating system adopts three tank overflow solution, has simple structure, small volume, convenient installation. Apply continuous dissolution and continuous dosing medicament environment.
  The mixer adopts special design of multistage blade structure
   Premixed accelerate the hydration of powder, can adjust the flow conditions.
specification
500L/h as example

seri	item	parameter	Quantity	Remark
1	Solution tank	1500L, SS304, 3 tanks	1 set	L*W*H: 0.9X1.8X1.1m
2	mixer	0.37kw,80RPM, 304	2 pcs
3	diaphragm type metering pump	GM500/0.3,PVC	2pcs
4	Pipeline fitting (PVC)	Manual ball valve DN25	1 set
		Y type filter DN 15
		Safety valve DN 15
		Back pressure valve DN15
		pulse damper
		Pressure gauge 0-1.0Mpa
		PVC pipeline and  auxiliaries
5	Liquid level gauge		1pc
6	Water supply system	Solenoid valve (G1), pressure reducing valve, ball valve, flow meter, pipe fittings	1 set
7	Dry powder dose system	Dry powder doser (stepless), Hopper 30L, Swirl premixed Q150, material level switch, Dry powder condensation heat insulation resistance device	1 set	0.5~1.5Kg/h
8	Control cabinet	Electric control cabinet	1 set	CHINT
		Contact button
		Wire,other accessories
9	Main bracket	Carbon steel, Base bottom, metering pump bottom	1 set

Preparation processing
YMJY series dry chemical dosing system is designed for powder material automatic continuous preparation and dosing system, from powder to preparation solution, whole process achieves automatic, safe and continuous operation. Dry powder according to the required dosage(set screw rotation speed) from hopper enter into the mixer, dilution through into the mixing tank after wetting set (water flow), achieved the concentration of solution. Diluted solution through slaking tank, and then enter the storage tank, the metering pump to transport to the designated point of liquids, when the solution storage tank in a low level, liquid level switch output signal, boot device to solution preparation process; When the solution at a high level of storage tank, liquid level switch signal, the cycle stops; If the storage tank is empty, the cycle will begin again. This system is able to continuously.